.jpg)
| TITLE | Unit | BML-600M (L) | |
| CAPACITY | Swing over bed | mm | 600 |
| Max. machining diameter | mm | Ø420 | |
| Distance between noses | mm | 968 (1468) | |
| Max. machining length | mm | 794,5 (1294,5) | |
| Slant angle of bed | 30° | ||
| TRAVEL | X-axis | mm | 230 |
| Z-axis | mm | 850 (1350) | |
| SPINDLE | Spindle speeds | rpm | 50 ~ 3500 |
| Spindle nose | ASA A2-8 | ||
| Spindle bore diameter | mm | Ø92 | |
| Front bearing diameter | mm | Ø130 | |
| Bar capacity | mm | Ø78 | |
| Hydraulic chuck diameter | mm | Ø250 | |
| FEEDRATE | Rapid feedrate on X-axis | m/min | 16 |
| Rapid feedrate on Z-axis | m/min | 20 | |
| Slyde way type | box ways | ||
| AUTOMATIC TOOL CHANGER | ATC type | hydraulic (direct indexing) | |
| No. of ATC | 10 | ||
| Square tool shank | mm | 25 x 25 | |
| Boring bar shank | mm | Ø40 | |
| Tool to tool | s | 0,15 | |
| TAILSTOCK | Tailstock type | auto, hydraulic | |
| Tapered bore type | MT4 | ||
| Tailstock quill travel | mm | 120 | |
| DRIVE MOTORS | Main spindle motor | kW | 15 / 18,5 |
| Servo mootrs on X- / Z-axis | kW | 3 / 3 | |
| Hydraulic oil pump | kW | 1,5 | |
| Chip conveyor | kW | 0,2 | |
| Coolant pump | kW | 0,8 | |
| ACCURACY | Positioning | mm | ±0,005 |
| Repeatability | mm | ±0,002 | |
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Controller FANUC 0i-TC | Controller FANUC 18i-TB |
| Spindle motor Fanuc α P30; 15/18,5 kW | Collet chuck |
| Servo motors on X,Z: Fanuc α12 / 3000 3/3 kW | Bar feeder |
| Collor8.4" LCD screen | 8- or 12-tools live tool turret |
| Hydraulic chuck | 10- or 12-tools V.D.I. turret |
| O.D. tool clamp blocks and gibs | C-axis |
| Boring bar holders Ø40mm | Foot pedal for tailstock |
| Boring bar bushings (Ø40 ~ Ø8, Ø10, Ø12, Ø16, Ø20, Ø25, Ø32mm) | Steady rest (manual operating) |
| Taper sleeves (iz Ø40 ~ na MK2, MK3, MK4) | Steady rest (auto operating) |
| Chip conveyor & chip bucket | Manual tool setter |
| Coolant system with collant tank | Auto tool setter |
| Oil and coolant separator | Parts catcher |
| Programmable tailstock with quill MT4 | Automatic open/close door |
| Foot pedal for hydraulic chuck | Oil mist collector |
| Auto lubrication system | ZF gearbox 2k-250 |
| Alarm light for end of program | Stabilizer |
| Grease gun | |
| Transformer (415V; 3Ph; 50Hz) | |
| Fully enclosed splash guard | |
| Work light | |
| Leveling bolts and pads | |
| Tool kit | |
| Maintenance and operating manuals | |
| CE mark | |
| Warranty time (machine -1 year; FANUC - 2 years) |