| TITLE | Unit | SMART-42T8 | ||
| CAPACITY | GANG TYPE | TURRET TYPE | ||
| Swing over bed | mm | Ø320 | ||
| Max. machining diameter | mm | Ø200 | Ø200 | |
| Max. machining length | mm | 140 | 140 | |
| Slant angle of bed | 20° | |||
| TRAVEL | X- axis | mm | 215 | 215 |
| Z-axis | mm | 150 | ||
| SPINDLE | Spindle speeds | rpm | 45 - 3500 (op. 6000) | |
| Spindle type | ASA A2-5 | |||
| Spindle bore diameter | mm | Ø44 | ||
| Front bearing diameter | mm | Ø80 | ||
| Bar capacity | mm | Ø42 | ||
| Hydraulic chuck diameter | mm | Ø160 | ||
| FEEDRATE | Rapid feedrate on X-axis | m/min | 16 | |
| Rapid feedrate on Z-axis | m/min | 16 | ||
| Slide ways type | box ways | |||
|
TOOLS TURRET |
ATC type | gang plate | hydraulic | |
| No. of ATC | 6 | 8 | ||
| Square tool shank | mm | 20 x 20 | 20 x 20 | |
| Boring bar shank Ø25 | pcs | 2 | 4 | |
| Square tool holder 16x16 radial | pcs | 1 | ||
| Square tool holder16x16 axial | pcs | 2 | ||
| Double tool holder 16x16 | pcs | 1 | ||
| DRIVE MOTORS | Main spindle motor power | kW | 5.5 | |
| Servo motors on X- / Z-axis | kW | 0,75/1 | ||
| Hydraulic pump | kW | 0,75 | ||
| Chip conveyor motor | kW | 0,22 | ||
| Coolant pump | kW | 0,075 | ||
| ACCURACY | Positioning | mm | ±0.005 | |
| Repeatability | mm | ±0.002 | ||
| MISCELLANEOUS | Power requirement | 208-220V; 10kW; 50 A | ||
| Machine dimension (W x D x H) | mm | 2813 x 1350 x 1825 | ||
| Machine weight (net) | kg | 2200 | ||
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Controller FANUC 0i-Mate-TC | Controller FANUC 0i-TC |
| Spindle motor Fanuc 5.5 kW | 8-tools hydraulic / servo turret |
| 8-tools hydraulic turret (TURRET TYPE) | C-axis (indexing) |
| Gang plate with T-slots (GANG TYPE) | Hard jaws for hydraulic chuck dia Ø160 mm |
| Servo motors on X,Z: Fanuc 0.75/1 kW | Tools holders |
| Monochrom LCD screen | Taper sleeves (Ø25 ~ MT1, MT2) |
| Hydraulic chuck Ø160mm with soft jaws | Parts catcher |
| Tool holders (16 x 16) gang type | Collet chuck |
| Boring bar holders Ø25 gang/turret type | Bar feeder |
| Boring bar bushings (Ø25 ~ Ø8,Ø10,Ø12,Ø16,Ø20 mm) | Manual tool setter |
| Chip conveyor & bucket | Automatic tool setter |
| Coolant system with high pressure pump and tank 80 litrov | Oil and coolant separator |
| Automatic lubrication system | Automatic open/close door |
| Alarm light for end of program | Oil mist collector |
| Transformer (415V; 3 Ph; 50Hz) | |
| Fully enclosed splash guard | |
| Work light | |
| Leveling bolts and pads | |
| Tool kit | |
| Maintenance and operating manuals | |
| CE mark | |
| Warranty time (machine -1 year; FANUC - 2 years) |