| TITLE | Unit | JSL-20AB | ||
| CAPACITY | Max. turning diameter of main spindle | mm | Ø20 | |
| Max. turning diemeter of sub spindle | mm | Ø20 | ||
| Max. drilling capacity of main spindle | mm | Ø10 | ||
| Max. drilling capacity of sub spindle | mm | Ø10 | ||
| Max. tapping capacity of main spindle | M8 | |||
| Max. tapping capacity of sub spindle | M8 | |||
| Max. cross drilling capacity | mm | 10 | ||
| Max. cross tapping capacity | M6 | |||
| Max. turning length (Fixed guide bush) | mm | 200 | ||
| Max. turning length (Rotary guide bush) | 85 (opt. 150) | |||
| Max. turning length (Non guide bush) | 45 | |||
| No. of axis controls | 9 | |||
| SPINDLE | Spindle speed range | rpm | 15 - 8000 | |
| Spindle bore diameter | mm | Ø29 | ||
| TOOLS | No. of external turning tools | pcs | 8 | |
| No. of internal turning tools | pcs | 5 | ||
| Size of tool | mm | 12 x 12 x 90 | ||
| No. of cross drillings | pcs | 4 (opt. 7) | ||
| Face tool holder No. (sub spindle) | pcs | 4 | ||
| No. of axis control | pcs | 7 | ||
| FEEDRATE | Rapid feedrate on X-axis | m/min | 24 | |
| Rapid feedrate on Z-axis | m/min | 24 | ||
| DRIVE MOTORS | Main spindle motor power | kW | 3.7 | |
| Sub spindle motor power | kW | Fanuc 2.2 | ||
| Servo motors on X1- / Z1 -axis | kW | 0.5/0.75 | ||
| Servo motors on Y-axis | kW | 0,75 | ||
| Servo motors on X2- / Z2 -axis | kW | 0.5/0.5 | ||
| Cross drilling motor | kW | 0.75 | ||
| End drilling motor | kW | 0,75 | ||
| Coolant motor | kW | 0,375 | ||
| Power requirement | kW | 15 | ||
| MISCELLANEOUS | Machine dimensions (L x W x H) | mm | 2430x1420x2135 | |
| Machine weight | kg | 2400 | ||
| STANDARD ACCESSORIES: | OPTIONAL ACCESSORIES: |
| Fixed guide bush holder | Simultaneously rotary guide bush holder |
| Guide bush 1x | Voltage stabilizer |
| Spindle collet 2x | Long parts catcher |
| Coolant inspection | Transformer |
| Cut off inspection | Multiple bar feeder 3.2M |
| Lubrication device | Chip conveyor |
| Parts catcher | ER 16 collet set |
| Leveling pad | |
| Cutting coolant device | |
| Work light | |
| Tool & tool box | |
| Chuck gripper | |
| Operation manual | |
| Non guide bush holder | |
| ER 16 collet chuck (two sides) | |
| Parts conveyor | |
| Stationary tool holder 2x | |
| Rotary tool holder 2x |